Honeywell V15W2 Explosion-Proof Basic Switches

Author : Honeywell Published Time : 2019-03-13
Honeywell V15W2 Explosion-Proof Basic Switches are designed to reduce the risk of explosions in white goods and in Zone 2 hazardous environments. These explosion-resistant switches are environmentally sealed to prevent flammable gases from entering the switching cavity. This reduces the chances of ignition of flammable gases in hazardous environments. The V15W2 switches feature IP67 equivalent rating, quick-connect terminals, 5A electrical rating, global package size acceptance, and a variety of actuators. Typical applications include valve actuators, commercial refrigeration, ice makers, HVAC/R, and appliances with new refrigerants.

Features

Approved for use in Zone 2 hazardous locationsIP67 equivalent materialUL, cUL, ENEC, and CQC approvalsIEC Ex approvals:Ex nC IIA T5 Gc for an ambient temperature range of -25°C to +85°C per IEC 60079-0 6th Edition (2011)IEC 60079-15 4th Edition (2010) via certificate IEC Ex DEK 17.0053U5A electrical ratingLong service lifeQuick-connect terminals

Specifications

Minimum 1,000,000 cycles @ maximum 180 cycles/minute mechanical life1000VAC dielectric strength for one minute between open contacts≤10mA leakage currentMaximum 50mΩ switch resistance

Applications

Appliances with new refrigerantsValve actuatorsCommercial refrigerationIce makers
Honeywell Newest

Honeywell HPM Particulate Matter Sensors offer a 100kHz switching frequency, 80mA supply current, and 5V ±0.2V supply voltage.

Date: 2019-08-07

Honeywell Sensing & Control VM821Q1 AMR 4-Pin Quadrature Sensor IC is available at Mouser Electronics and is designed to detect the speed and direction and position of a ring magnet encoder target.

Date: 2019-06-11

Honeywell V15W2 Explosion-Proof Basic Switches are designed to reduce the risk of explosions in white goods and in Zone 2 hazardous environments.

Date: 2019-03-13

Honeywell MicroPressure Evaluation Boards offer a 3.3VDC supply voltage range and a 0 to 30psi pressure range, depending on the model.

Date: 2019-01-16

Honeywell Transportation Attitude Reference Sensors (TARS Series) are available at Mouser Electronics and are designed to report vehicle angular rate, acceleration, and inclination for demanding applications.

Date: 2018-08-30

Honeywell Basic Board Mount Pressure Sensors are basic pressure sensors that include Compensated/Amplified (ABP series), Compensated/Unamplified (TBP series), and Uncompensated/Unamplified (NBP series) types.

Date: 2018-08-13

Honeywell SEK002 Sensor Evaluation Kit demonstrates and evaluates multiple series of temperature, humidity, pressure, and particle sensors.

Date: 2018-02-09

Honeywell MICRO SWITCH MT Series Switches are miniature switches designed for a rugged applications that need a cost-effective toggle switch.

Date: 2017-06-05